Products > Active Devices > Media Converter
Fiber Media Converter
Description:
The fiber switches are unmanageable, when convert transmission, all ports share the same data. They can extend the network transmission from 100m to 120km and can realize the interconnection between motherboard server, Repeaters, hubs, switches, terminal. Plug and play design makes easy installation, no on-site adjustment. Operation status can be monitored through a set of Diagnostic LED.
- In conformity to IEEE802.3 10base-T, IEEE802.3u 100 base-TX/FX, IEEE802.3ab 1000 base-T, IEEE802.3z,1000base-SX/LX, IEEE802.1a, IEEE802.1PQ, IEEE802.1d Spanning Tree.
- Hot Plug-gable & Wall-Mountable.
- Stable performance more than 50thousand hours with fault-free.
- Unique IC solution applied
- Supports 10/100Mbps and 10/100/1000M full/half duplex, easy upgrades.
- Auto MDI/MDI-X
- Auto Negotiation
- Support flow control
- Stable performance of more than 50 thousands hours with fault-free.
- In conformity with safety code of FCC, CE and Ro
|
Optical Interface
|
Connector | 1×9 SC/FC/ST, LC (SFP Slot) |
| Data Rate | 100Mbps, 1000Mbps | |
| Duplex Mode | Full duplex | |
|
Fiber
|
MM 50/125um,62.5/125um | |
| SM 9/125um | ||
|
Distance
|
100Mbps:MM 2km, SM 25/40/60/80/100/120km | |
| 1000Mbps:MM 550m/2km, SM 20/40/60/80km | ||
|
Wavelength
|
MM 850nm,1310nm | |
| SM 1310nm,1550nm | ||
| WDM Tx1310/Rx1550nm(A side),Tx1550/Rx1310nm(B side) | ||
| WDM Tx1490/Rx1550nm(A side),Tx1550/Rx1490nm(B side) | ||
|
UTP Interface
|
Connector | RJ45 |
| Data Rate | 10/100Mbps, 10/100/1000Mbps | |
| Duplex Mode | Half/full duplex | |
| Cable | Cat5, Cat6 | |
| Power Input | Adapter Type | DC5V |
| VLAN | Optional, isolate Network conflict, prevent Network storm | |
| Power Consumption | ＜3W | |
| Temperature | 0~50℃ Operating; -40~70℃ Storage | |
| Humidity | 5~95%(no condensing) | |
| MTBF | ≥10.0000h | |
